Subaru Forester: Compass calibration
1. If a “C” is displayed in the compass window, the compass needs to be calibrated.
2. Drive the vehicle in a circle at 5 mph (8 km/h) or less until the display reads a direction.
3. You can also calibrate the compass by driving your vehicle on your everyday routine. The compass will be calibrated once it has tracked a complete circle.
4. To recalibrate your compass, push and hold the compass display button for 9 seconds until a “C” appears in the compass window.
5. Calibrate the compass according to step 2 or step 3.
Compass zone adjustment
Compass calibration zones 1. Refer to the “Compass calibration zones” map shown above to verify that the compass zone setting is correct for your geographical location. 2. Press and ...HomeLink® Wireless Control System
The HomeLink® Wireless Control System can be used to activate remote control devices such as gate operators, garage door openers, door locks, home lighting and security systems. There are ...See also:
Configurations for Use of Child Restraints
...
Battery
WARNING - Battery dangers Always read the following instructions carefully when
handling a battery. Keep lighted cigarettes and all other flames or sparks away
from the battery. Hydrogen, a highly ...
Switching HD on or off
The factory setting for HD radio is off. However,
when driving through areas with weak HD
signals (fringe areas), you may experience that
the radio repeatedly switches between analogue/
digita ...