Nissan Rogue: Activating Around View Monitor
Selector lever operation:
- When the selector lever is shifted into the “R” (Reverse) position (1 ) while a screen other than the Around View Monitor A is displayed, Around View Monitor is activated and the rear view/bird’s-eye view screen B is displayed.
The screen B switches back to screenA when the selector lever is shifted out of the “R” (Reverse) position (2 ).
CAMERA button operation:
- When the CAMERA button is pushed (8 ) while a screen other than the Around View Monitor A is displayed, Around View Monitor is activated and the front view/ bird’s-eye view screen D is displayed.
How to switch the display
: Shift the selector/shift lever : Push the CAMERA button A : Original screen before the Around View Monitor is operated B : Rear view/bird-eye view screen C : Rear view/front-side view s ...Operations after activation
- When the rear view is displayed on the left side on the screen (B or C ), the view on the right side switches between the bird’seye view B and the front-side view C each time the CAMERA bu ...See also:
Parking aids
The rear parking aids sensors are automatically
disabled when a trailer with an approved
electrical connector is connected.
Note: Trailers fitted with LED lights will not
disable the rear parking ...
Horn
Horn
Press the horn pad on the steering wheel to sound the horn. The horn will sound
with the ignition switch in any position. ...
Tightening the cargo net
Seat belt reel holder behind the front seats
Insert belt hook 1 into cargo tie-down ring 2 in the direction of the
arrow.
Pull tensioning strap 3 by the loose end in the direction of the ar ...