Jeep Liberty: Towing With HSA - Hill Start Assist (HSA) - Electronic Brake Control System - Starting And Operating - Jeep Liberty Owner's ManualJeep Liberty: Towing With HSA

HSA will provide assistance during acceleration on an incline while towing a trailer.

WARNING!
• If you use a trailer brake controller with your trailer, the trailer brakes may be activated and deactivated with the brake switch. If so, there may not be enough brake pressure to hold both the vehicle and the trailer on a hill when the brake pedal is released. In order to avoid rolling down an incline while resuming acceleration, manually activate the trailer brake or apply more vehicle brake pressure prior to releasing the brake pedal.

• HSA is not a parking brake. Always apply the parking brake fully when leaving your vehicle.

Also, be certain to leave the transmission in PARK.

• Failure to follow these warnings can result in a collision or serious personal injury.

    Hill Start Assist (HSA)
    The HSA system is designed to help the driver accelerate the vehicle from a complete stop while on an incline. If the driver releases the brake while stopped on an incline, HSA will continue to ...

    Disabling And Enabling HSA
    This feature can be turned on or turned off. To change the current setting, proceed as follows: For vehicles equipped with the Electronic Vehicle Information Center (EVIC), refer to “Hill Start ...

    See also:

    Other voice control settings found in MY CAR
    • Voice user setting: Two user profiles can be set by pressing MY CAR and going to Settings Voice settings Voice user setting. Select User 1 or User 2. • Voice output volume: Press ...

    Floor mat
    Floor mat Retaining pins are located on the driver’s side floor. The floor mat is secured using the built-in grommets, by placing the grommets over the pins and pushing them downward. ...

    Using the automatic mode
    1 Press . The air conditioning system begins to operate. Air outlets and fan speed are automatically adjusted according to the temperature setting. 2 Press “∧” on to increase the tempe ...