Jeep Liberty: To Unlatch The Liftgate Flipper Glass
Press the FLIPPER GLASS button twice to unlatch the liftgate flipper glass.
WARNING!
To avoid injury stand back when opening. Glass will
automatically rise.
Flash Lights With Lock
The feature will cause the turn signal lights to flash when
the doors are locked or unlocked with the RKE transmitter.
This feature can be turned on or turned off. To change
the current setting, ...
Using The Panic Alarm
NOTE: The PANIC and Security Alarms are quite
different. Please take a moment to activate the PANIC
and the Security modes to hear the differences in the
horn. In case one should go off in the f ...
See also:
In case of an emergency while driving
If the engine stalls at a crossroad or crossing If the engine stalls at a crossroad
or crossing, set the shift lever in the N (Neutral) position and then push the vehicle
to a safe place. If you h ...
Changing the set speed
After a speed has been set, it can be increased
or decreased by using the or
buttons.
Each time one of these buttons is pressed, the
vehicle's speed changes by 5 mph
(approximately 8 km/h). ...
Floor Mats
WARNING
If a floor mat is the wrong size or is not properly installed, it can interfere
with the pedals. Interference with the pedals can cause unintended acceleration
and/or increased stopping d ...