Nissan Rogue: Tire wear and damage - Changing wheels and tires - Wheels and tires - Maintenance and do-it-yourself - Nissan Rogue Owner's ManualNissan Rogue: Tire wear and damage

- Tires should be periodically inspected

- Tires should be periodically inspected for wear, cracking, bulging or objects caught in the tread. If excessive wear, cracks, bulging or deep cuts are found, the tire(s) should be replaced.

- The original tires have built-in tread wear indicators. When wear indicators are visible, the tire(s) should be replaced.

- Tires degrade with age and use.

Have tires, including the spare, over 6 years old checked by a qualified technician, because some tire damage may not be obvious. Replace the tires as necessary to prevent tire failure and possible personal injury.

- Improper service of the spare tire may result in serious personal injury. If it is necessary to repair the spare tire, contact a NISSAN dealer.

- For additional information regarding tires, refer to “Important Tire Safety Information” (US) or “Tire Safety Information” (Canada) in the Warranty Information Booklet.

    Changing wheels and tires
    Tire rotation NISSAN recommends rotating the tires every 7,500 miles (12,000 km). (See “Flat tire” in the “6. In case of emergency” section for tire replacing procedures.) As soon as ...

    Replacing wheels and tires
    When replacing a tire, use the same size, tread design, speed rating and load carrying capacity as originally equipped. (See “Specifications” in the “9. Technical and consumer information ...

    See also:

    Maintenance Schedule
    The following table shows the times when you should perform regular maintenance on your vehicle. This table shows in miles, kilometers and months when you should perform inspections, adjustments, ...

    Front Seat — Manual Recline
    To recline the seatback, lean forward slightly and lift the lever. Then lean back to the position desired and release the lever. To return the seatback to its normal upright position, lean forwa ...

    Callback
    1. Select the “CALL BACK” menu. 2. Press the OFF hook switch . 3. Select the desired number by turning the “TUNE/TRACK/CH” dial. 4. Perform either of the following procedures. – Press ...