GMC Terrain: Shoulder Belt Height Adjuster - Lap-Shoulder Belt - Safety Belts - Seats and Restraints - GMC Terrain Owner's ManualGMC Terrain: Shoulder Belt Height Adjuster

The vehicle has a shoulder belt height adjuster for the driver and right front passenger seating positions.

Adjust the height so the shoulder portion of the belt is on the shoulder and not falling off of it. The belt should be close to, but not contacting, the neck. Improper shoulder belt height adjustment could reduce the effectiveness of the safety belt in a crash. See How to Wear Safety Belts Properly on page 3‑13.

Move the height adjuster up to the desired position by pushing up on the height

Move the height adjuster up to the desired position by pushing up on the height adjuster.

After the height adjuster is set to the desired position, try to move it down without pressing the release button (A) to make sure it has locked into position. Press the release button to lower the height adjuster.

    Lap-Shoulder Belt
    All seating positions in the vehicle have a lap-shoulder belt. The following instructions explain how to wear a lap-shoulder belt properly. 1. Adjust the seat, if the seat is adjustable, so you can ...

    Safety Belt Pretensioners
    This vehicle has safety belt pretensioners for front outboard occupants. Although the safety belt pretensioners cannot be seen, they are part of the safety belt assembly. They can help tighten the ...

    See also:

    Additional Maintenance and Care
    Your vehicle is an important investment and caring for it properly may help to avoid future costly repairs. To maintain vehicle performance, additional maintenance services may be required. It is ...

    Accessing navigation
    From the Home menu touch the On road nav soft key. Alternatively press the NAV hard key on the facia. A caution screen will be displayed. If the navigation screen language has not been set, now is ...

    Timed climate remote control
    The dedicated remote control has a range of approximately 100m (328ft). Press and hold the ON button for two seconds. Note: Avoid touching the antenna when operating the ON or OFF button. Timed ...