Volvo XC60: Shiftlock
When your vehicle is parked, the gear selector is locked in the P (Park) position. To release the selector from this position, the ignition must be in mode II (see page 82) or the engine must be running. Depress the brake pedal, press the button on the front side of the gear selector and move the selector from P (Park).
Options and accessories
Optional or accessory equipment described in
this manual is indicated by an asterisk.
Optional or accessory equipment may not be
available in all countries or markets. Please
note that some veh ...
Anti-lock Brake System (ABS)
The ABS system performs a brief self-diagnostic
test when the engine has been started and
driver releases the brake pedal. Another automatic
test may be performed when the vehicle
first reache ...
See also:
Parking brake warning
The light illuminates with the parking
brake applied while the ignition switch is
in the “ON” position. It turns off when the
parking brake is fully released. ...
What to Use
To determine what kind of fluid to use, refer to Recommended Fluids and Lubricants
on page 11‑12. Always use the proper fluid.
Notice: Use of the incorrect fluid may damage the vehicle and th ...
Notes for 4MATIC vehicles
Vehicles with 4MATIC must not be towed with either the front or the rear axle
raised, as doing so will damage the transmission.
If the vehicle has transmission damage or damage to the front or r ...
