Jeep Liberty: Rear Window Defroster - Rear Window Features - Understanding The Features Of Your Vehicle - Jeep Liberty Owner's ManualJeep Liberty: Rear Window Defroster

The rear window defroster button is located on the

The rear window defroster button is located on the climate control (Mode) knob. Press this button to turn on the rear window defroster and the heated outside mirrors. An indicator in the button will illuminate when the rear window defroster is on. The rear window defroster automatically turns off after approximately 10 minutes. For an additional five minutes of operation, press the button a second time.

NOTE: To prevent excessive battery drain, use the rear window defroster only when the engine is operating.

CAUTION!
Failure to follow these cautions can cause damage to the heating elements:

• Use care when washing the inside of the rear window. Do not use abrasive window cleaners on the interior surface of the window. Use a soft cloth and a mild washing solution, wiping parallel to the heating elements. Labels can be peeled off after soaking with warm water.

• Do not use scrapers, sharp instruments, or abrasive window cleaners on the interior surface of the window.

• Keep all objects a safe distance from the window.

    Rear Window Wiper/Washer
    The rear wiper/washer is controlled by a rotary switch located on the control lever. The control lever is located on the right side of the steering column. Rear Wiper/Washer Control Rotate t ...

    Roof Luggage Rack — If Equipped
    NOTE: Roof rack and crossbars cannot be used on vehicles equipped with Skyslider . The load carried on the roof, when equipped with a luggage rack, must not exceed 150 lbs (68 kg), and it shoul ...

    See also:

    To Play a Disc
    To load or play discs, the ignition switch must be in the ACCESSORY (I) or ON (II) position. You operate the disc changer with the same controls used for the radio. To select the disc changer, ...

    Day/Night mode
    The screens can be set for three different lighting conditions: Auto, Day or Night. Press on the remote control and change the setting under Day/Night mode on the screen. See also page 251 f ...

    Information display
    Information display 1) Outside temperature indicator 2) Fuel consumption indicator With the ignition switch in the “ON” position, the outside temperature and fuel consumption are indic ...