Mercedes-Benz GLK-Class: High-beam flasher - Combination switch - Exterior lighting - Lights and windshield wipers - Mercedes-Benz GLK-Class Owner's ManualMercedes-Benz GLK-Class: High-beam flasher

  • To switch on: turn the SmartKey in the ignition lock to position 1 or 2 or start the engine.
  • Pull the combination switch in the direction of arrow 3.
    High-beam headlamps
    To switch on the high-beam headlamps: turn the SmartKey in the ignition lock to position 2 or start the engine. Turn the light switch to or or . Press the combination switch beyond th ...

    Hazard warning lamps
    The hazard warning lamps automatically switch on if: an air bag is deployed. the vehicle is slowed down severely from a speed of over 45 mph(70 km/h) and comes to a halt. To switch on the ...

    See also:

    Epb warning indicators
    If the system detects a fault with the EPB, the amber brake warning indicator will illuminate accompanied by a message on the message centre. If the system detects a fault while EPB is operating, ...

    Windshield Wiper Blades
    Clean the rubber edges of the wiper blades and the windshield periodically with a sponge or soft cloth and a mild non-abrasive cleaner or use the washer solvent. This will remove accumulations o ...

    Drive-away locking
    Drive-away locking automatically locks all doors at a set speed when the vehicle is in motion. This feature can be enabled/disabled via Drive-away locking in the Vehicle Settings menu. See 56, VEH ...