Jeep Liberty: Power Door Locks
A power door lock switch is located on each of the front door trim panels. Use this switch to lock or unlock the doors and liftgate.
Power Door Lock Switch Location
1 - Unlock
2 - Lock
If you press the power door LOCK switch while the key is in the ignition, and any front door is open, the power locks will not operate. This prevents you from accidentally locking your keys in the vehicle. Removing the key or closing the door will allow the locks to operate. A chime will sound if the key is in the ignition switch and a door is open, as a reminder to remove the key.
- Automatic Door Locks — If Equipped
- Automatic Unlock Doors On Exit
- Automatic Unlock Doors On Exit Programming
Manual Door Locks
To lock each door, push the door lock knob on each door
trim panel downward. To unlock each door, pull the door
lock knob on each door trim panel upward.
Manual Lock Knob
If the door lock knob ...
Automatic Door Locks — If Equipped
The auto door lock feature default condition is disabled.
When enabled, the door locks will lock automatically
when the vehicle’s speed exceeds 15 mph (24 km/h). The
auto door lock feature can ...
See also:
Lift gate release
Lift gate release
If the lift gate cannot be opened due to a
discharged battery, follow these steps.
1. Remove the cover inside of the lift gate with
a suitable tool.
2. Move the lever toward ...
Power Outlets
The accessory power outlets can be used to connect electrical equipment, such
as a cell phone or MP3 player.
There are four accessory power outlets in the following locations: below the
CD slot, ...
Cleaning the seat belts
Use clean, lukewarm water and soap solution.
Do not clean the seat belts using chemical cleaning agents. Do not dry the
seat belts by warming them above 176 ‡ (80 †) or placing them in ...