Range Rover Evoque: Pairing and connecting a bluetooth® media device
For further information on Bluetooth® and device compatibility, see 141, BLUETOOTH® INFORMATION.
Using your media device
Note: The process of pairing and connecting your media device with the vehicle using the media device, will vary depending on the type of media device.
1. Switch the ignition on and ensure that the touch screen is active.
2. From the home menu, select Audio/Video, then My Music.
3. A menu will appear. Select Search new.
4. Select Device to vehicle option.
Note: The vehicle’s Bluetooth® system is discoverable for only 3 minutes.
5. Using the media device, search for Bluetooth® devices.
On some devices, this is referred to as new paired device. See your operating instructions for further information.
6. When the vehicle’s Bluetooth® system is discovered, follow the on-screen instructions. Select Yes when prompted, to confirm the pairing.
Either your device or the vehicle system will ask for a PIN (Personal Identification Number). When prompted, enter a PIN of your choice and select OK to confirm.
7. Enter the same PIN into the other device.
8. Once your device is paired and connected to the system, a confirmation message will be displayed, before switching to the My music, Bluetooth® view.
Note: Some media players do not automatically connect and need to be manually connected, via the device or by using the Change device option.
Using the touch screen
1. Switch on your device’s Bluetooth® connection. Make sure that it is in Bluetooth® discoverable mode, sometimes referred to as find me mode (see your device’s operating instructions for more information).
2. Switch the ignition on and ensure that the touch screen is active.
3. From the home menu, select Audio/Video, then My Music.
4. A menu will appear. Select Search new.
5. Select Vehicle to device option.
6. Identify your device from the displayed list and select the corresponding Pair and connect option.
Note: If more than 5 devices are detected, it may be necessary to use the scroll bar to see the entire list.
7. When prompted, enter the PIN code into your device. See your device operating instructions for further information.
8. Once your device is paired and connected to the system, a confirmation message will be displayed before switching to the My music, Bluetooth® view.
Note: Due to the duration of a Bluetooth®
search, it is advised that the time-out to home
screen feature is switched off before
attempting to search for Bluetooth® devices.
This setting can be changed within Vehicle,
Syst settings, Display set, Timeout to home
screen.
READ NEXT:
Automatic reconnection
If devices have already been paired and
connected, when Bluetooth® is selected from
the My music menu, the system will
automatically connect to the last used device (a
confirmation pop-up appears
Loss of connection
If a loss of connection between the vehicle and
the Bluetooth® device occurs, a pop-up is
displayed. Select Reconnect to automatically
restore the connection. A confirmation pop-up
will appear be
Changing/disconnecting a device
- From the menu, select Change device.
- Select Disconnect. A confirmation pop-up
will appear and then you will be given the
option to Search new or select a different
device from the list of pair
SEE MORE:
Changing a fuse
Always turn off the ignition
system and
the affected electrical circuit, before
replacing a fuse.
Fit Land Rover approved replacement
fuses of the same rating and type, or
fuses of matching specification. Using
an incorrect fuse, may result in damage
to the vehicle's electrical system and
Safety information
Some tyre damage may only be
partially sealed, or may not seal at
all, depending on the amount and type
of damage. Any loss of tyre pressure
can seriously affect vehicle safety.
Do not use the tyre repair kit if the tyre
has been damaged by driving while
under inflated.
Only use the tyre re
