Subaru Forester: Windshield wiper blade assembly
1. Raise the wiper arm off the windshield.
1) Open the cover
2) Pull down the wiper blade
2. Remove the wiper blade assembly by opening the cover and pulling it down in the direction shown in the illustration.
3. Install the wiper blade assembly to the wiper arm. Make sure that it locks in place.
4. Hold the wiper arm by hand and slowly lower it in position.
Replacement of wiper blades
Grease, wax, insects, or other material on
the windshield or the wiper blade results in
jerky wiper operation and streaking on the
glass. If you cannot remove the streaks
after operating the w ...
Windshield wiper blade rubber
1) Support
1. Grasp the locked end of the blade
rubber assembly and pull it firmly until the
stoppers on the rubber are free of the
support.
1) Metal spines
2. If the new blade rubber is ...
See also:
Tire rotation
Tires should be rotated every 7,500
miles (12,000 km). If you notice that
tires are wearing unevenly between rotations,
have the car checked by a
Hyundai dealer so the cause may be
correct ...
Screen aspect ratio
Three screen aspect ratios can be set:
Normal, Zoom 1 and Zoom 2.
Normal: The image on the screen is presented
at the normal aspect ratio (usually 4:3 or 16:9).
Zoom 1: Full-screen image, but par ...
General functions
1 RADIO button for selecting the AM, FM1,
FM2, Sirius1* or Sirius2* wavebands.
2 Number key buttons (0-9).
3 Navigate among the menu alternatives in
the display by turning TUNE.
4 Confirm you ...
