Mercedes-Benz GLK-Class: High-beam headlamps
- To switch on the high-beam headlamps: turn the SmartKey in the ignition lock to position 2 or start the engine.
- Turn the light switch to
or 
or
. - Press the combination switch beyond the pressure point in the direction
of arrow 1.
In the or
position, the highbeam headlamps
are only switched on when it is dark and the engine is running. The
indicator lamp in the instrument
cluster lights up when the high-beam headlamps are switched on. - To switch off the high-beam headlamps: move the combination switch back
to its normal position. The indicator
lamp in the instrument cluster goes out.
Turn signals
High-beam headlamps
ight turn signal
High-beam flasher
Left turn signal
To indicate briefly: press the combination switch briefly to the pressure
point in the direction of arrow 2 ...
High-beam flasher
To switch on: turn the SmartKey in the ignition lock to position 1 or
2 or start the engine.
Pull the combination switch in the direction of arrow 3.
...
See also:
Maintenance Schedule
The following table shows the times when you should perform regular maintenance
on your vehicle. This table shows in miles, kilometers and months when you should
perform inspections, adjustments, ...
Traction Control System (TCS)
The traction control system limits wheel spin. The system is on when the vehicle
is started.
○ To turn off traction control, press and release
located on the console.
illuminates and the ...
Driving Guidelines
Your vehicle has higher ground
clearance that allows you to travel
over bumps, obstacles, and rough
terrain. It also provides good
visibility so you can anticipate
problems earlier.
Because ...
