Nissan Rogue: Vehicle set-up
1. Park the vehicle on a level surface and apply the parking brake.
2. Start the engine and let it idle until it reaches operating temperature.
3. Turn the engine off and wait more than 10 minutes.
4. Raise and support the vehicle using a suitable floor jack and safety jack stands.
- Place the safety jack stands under the vehicle jack-up points.
- A suitable adapter should be attached to the jack stand saddle.
Make sure the correct lifting and support points are used to avoid vehicle damage.
Changing engine oil and filter
Change the engine oil and filter according to the
maintenance log shown in the NISSAN Service
and Maintenance Guide. ...
Engine oil and filter
1. Oil filler cap
2. Oil drain plug
3. Oil filter
1. Place a large drain pan under the drain plug.
2. Remove the oil filler cap.
3. Remove the drain plug with a wrench and
completely drain ...
See also:
Example of the type of accident in which the SRS curtain airbag will
basically not deploy.
The SRS curtain airbags are not basically
designed to deploy if the vehicle pitches
end over end. ...
Sunroof
If your vehicle is equipped with this feature, you can slide or tilt your sunroof
with the sunroof control buttons located on the overhead console. The sunroof can
only be opened, closed, or til ...
