Subaru Forester: Tripped sensor identification
The security indicator light flashes when the alarm system has been triggered.
Also, the number of flashes indicates the location of unauthorized intrusion or the severity of impact on the vehicle.
When the ignition switch is turned to the “ON” position, the indicator light will light for 1 second and then flash as follows.
- When a door or rear gate was opened:
5 times
- When the ignition switch was turned to
the “ON” position: 3 times
- When a strong impact or multiple
impacts were sensed: twice (only vehicles
with shock sensors (dealer option))
- When a light impact was sensed: once
(only vehicles with shock sensors (dealer
option))
NOTE
Any of the above indicator light flashings
will recur each time the ignition
switch is turned to the “ON” position.
Rearming the alarm system cancels the flashing.
Disarming the system
To disarm the system, briefly press the “” button on the transmitter. ...Shock sensors (dealer option)
The shock sensors trigger the alarm system when they sense impacts applied to the vehicle and when any of their electric wires are cut. The alarm system causes the horn to sound and the turn ...See also:
Operation
If the driver and/or front passenger have/
has not yet fastened the seatbelt(s) when
the ignition switch is turned to the “ON”
position, the seatbelt warning light(s) will
flash for 6 seco ...
Engine Drag Control (EDC)
EDC helps keep the engine running if the
wheels show a tendency to lock, e.g., when
shifting down in the Geartronic manual shifting
mode or while using the engine's braking function
on a slipp ...
Registering by phone
1. Select the “BY PHONE” menu.
2. Select the “CONFIRM” menu. Then
“TRANSFER” is displayed.
3. Transfer the data from the cell phone.
For details about transferring the data,
refer t ...