Jeep Liberty: Treadwear
The Treadwear grade is a comparative rating, based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear one and one-half times as well on the government course as a tire graded 100. The relative performance of tires depends upon the actual conditions of their use, however, and may depart significantly from the norm due to variations in driving habits, service practices, and differences in road characteristics and climate.
Department Of Transportation Uniform Tire Quality Grades
the National Highway Traffic Safety Administration. The
specific grade rating assigned by the tire’s manufacturer
in each category is shown on the sidewall of the tires on
your vehicle.
All p ...
Traction Grades
The Traction grades, from highest to lowest, are AA, A, B,
and C. These grades represent the tire’s ability to stop on
wet pavement, as measured under controlled conditions
on specified govern ...
See also:
Checking tire pressure electronically
Make sure that the SmartKey is in position 2 () in the ignition
lock.
Press the or
button on the steering wheel to
select the Service menu.
Press the or
button to select Tire Pres ...
Cleaning the display
Before cleaning the display, make sure that it is switched off and has
cooled down.
Clean the display surface using a commercially-available microfiber cloth
and TFT/LCD display cleaner.
...
Inflation Guidelines
Keeping the tires properly inflated
provides the best combination of
handling, tread life, and riding
comfort.
Underinflated tires wear unevenly,
adversely affect handling and fuel
economy, ...
