Suzuki Grand Vitara: Tire Changing Tool
Tire Changing
Tool
The jack, wheel brace and jack handle are stowed in the rear left corner of the luggage compartment. Remove the cover to access the tools. To remove the jack, turn its shaft counterclockwise and pull the jack out of the storage bracket. To stow the jack, place it in the storage bracket and turn the shaft clockwise until the jack is securely held in place.
WARNING: The jack should be used only to change wheels. It is important to read the jacking instructions in the “EMERGENCY SERVICE” section of this manual before attempting to use the jack.
WARNING: After using the jack, extension rod and lug wrench, be sure to stow them securely, or they could be thrown about in an accident, causing injury.
Frame Hooks
Front Rear Frame hooks are provided at the front and rear of the vehicle. To access the front hook, unhook the lower part of the cover (1) and then remove the cover (1). WARNING: Do not use th ...Shopping Hook (if equipped)
Shopping Hook (if equipped) The shopping hooks are located on both sides of the luggage compartment. You can hang the shopping bag or other suitable objects on the hook. This hook is not desig ...See also:
Ignition Key Removal
Automatic Transmission
Place the shift lever in PARK. Turn the key to the ACC
position and then push the key and cylinder inward
slightly and rotate the key to the LOCK position. Then
remove th ...
Air conditioner specification label
The air conditioner specification label is attached
to the underside of the hood as shown. ...
Head restraints
Head restraints supplement the other
vehicle safety systems. They may provide
additional protection against injury
in certain rear end collisions. Adjust the
head restraints properly, as spe ...