Mercedes-Benz GLK-Class: Storing the current speed or calling up the last stored speed
WARNING
The set speed stored in memory should only be set again if prevailing road conditions and legal speed limits permit. Possible acceleration or deceleration differences arising from returning to the preset speed could cause an accident and/or serious injury to you and others.
- Briefly pull the cruise control lever towards you ?.
- Remove your foot from the accelerator pedal.
The first time cruise control is activated, it stores the current speed or regulates the speed of the vehicle to the previously stored speed.
- Setting a speed
- Making adjustments in 1 mph (Canada: 1 km/h) increments
- Making adjustments in 5 mph (Canada: 10 km/h) increments
- Deactivating cruise control
Storing and maintaining the current speed
You can store the current speed if you are driving faster than 20 mph (30 km/h). Accelerate the vehicle to the desired speed. Briefly press the cruise control lever up 1 or down 2. Remove your ...Setting a speed
WARNING Keep in mind that it may take a brief moment until the vehicle has made the necessary adjustments. Increase or decrease the set vehicle speed to a value that the prevailing road con ...See also:
Pop-ups
Some menus and control screens will appear
as pop-ups, overlaying the current screen.
Warning and information pop-ups may also
appear on the display. Take notice of any
warnings and follow any on- ...
Easy entry/exit
When Easy entry/exit is configured, the driver’s
seat will automatically lower when the ignition
is switched off and the door release lever is
used. Upon returning to the vehicle, when the
drive ...
Temperature Grades
The temperature grades are A (the highest), B, and C,
representing the tire’s resistance to the generation of heat
and its ability to dissipate heat, when tested under
controlled conditions on ...