Subaru Forester: START
The engine is started in this position. The starter cranks the engine to start it. When the key is released (after the engine has started), the key automatically returns to the “ON” position.
Do not turn the ignition switch to the “START” position while the engine is running.
If your registered key fails to start the engine, pull out the key once (the security indicator light will blink), and then insert the key in the ignition switch and turn it to the “START” position and again try to start the engine.
NOTE
The engine may not start in the following
cases:
- The key grip is touching another key or a metallic key holder.
- The key is near another key that contains an immobilizer transponder.
- The key is near or touching another transmitter.
ON
This is the normal operating position after
the engine is started. ...
Key reminder chime
The reminder chime sounds when the
driver’s door is opened and the ignition
switch is in the “LOCK” or “Acc” position.
The chime stops under the following
conditions.
- when the igni ...
See also:
Non-turbo models
Non-turbo models
1) Connector
2) Clip
3) Clamp
4) Air intake boot
5) Clip
1. Unplug the connector that is attached
to the top of the air cleaner case.
2. Detach the connector cable from ...
Supported Media (Disc Types)
The MP3/WMA file recording media supported by the
radio are CDDA, CD-R, CD-RW, MP3,WMA, DVD Video,
DVD-R, DVD-RW, DVD+R, DVD+RW, and CDDA+MP3. ...
Notes on technical data
The data stated here specifically refers to a vehicle with standard equipment.
Consult an authorized Mercedes-Benz Center for the data for all vehicle variants
and trim levels. ...
