Suzuki Grand Vitara: Speedometer/Odometer/Tripmeter/Brightness Control
Speedometer/Odometer/Tripmeter/Brightness
Control (1) Speedometer. (2) Odometer/Tripmeter. (3) Odometer/Tripmeter selector,
Brightness control knob.
Speedometer
The speedometer indicates vehicle speed in km/h and miles/h.
Odometer/Tripmeter
When the ignition switch is turned to “ON”, the display shows the odometer or tripmeter. The odometer records the total distance the vehicle has been driven. The tripmeter can be used to measure the distance traveled on short trips or between fuel stops.
CAUTION: Keep track of your odometer reading and check the maintenance schedule regularly for required services. Increased wear or damage to certain parts can result from failure to perform required services at the proper mileage intervals.
When the ignition switch is turned to the “ON” position, the display shows the odometer or trip meter. The display shows three types of indication; odometer, trip meter A and trip meter B. Push the selector knob (3) quickly to switch the indication among the three. You can use the two trip meters (A and B) independently.
Hold in the selector knob for about 2 seconds to reset the trip meter to zero.
Brightness Control
(3) Brightness control knob (4) In this position, the meter lights are the dimmest
and the other instrument panel lights are turned off. (5) In this position, the
instrument panel lights are the brightest.
Your vehicle has a system to automatically dim the instrument panel lights when the ignition switch is in the “ON” position and the lighting switch is either (a) turned to the second or third position, or (b) turned to the “AUTO” position and it is dark around the light sensor. The level of brightness depends on the position of the brightness control knob (3). To reduce the brightness and activate the automatic dimming feature, turn the knob (3) counterclockwise. When the knob (3) is turned counterclockwise to position (4), the meter brightness becomes dimmest and the other instrument panel lights are turned off. To brighten the instrument panel lights, turn the knob (3) clockwise. To cancel the automatic dimming feature and maintain full brightness, turn the knob (3) clockwise to position (5).
A/T Selector Position Indicator (if equipped)
A/T Selector Position Indicator (if equipped) When the ignition switch is in the “ON” position, this indicator shows the selector position of automatic transmission. ...Tachometer
Tachometer The tachometer indicates engine speed in revolutions per minute. CAUTION: Never drive with the engine speed indicator in the red zone or severe engine damage can result. ...See also:
Cleaning the BLIS camera lenses
In order to function optimally, the BLIS camera
lenses must be kept clean. They can be wiped
clean with a soft cloth or wet sponge.
CAUTION
• Clean the lenses carefully to avoid
scratching. ...
SUBARU advanced frontal airbag system
Your vehicle is equipped with a SUBARU
advanced frontal airbag system that complies
with the new advanced frontal airbag
requirements in the amended Federal
Motor Vehicle Safety Standard (FMVS ...
Lap/Shoulder Belt
The lap/shoulder belt goes over
your shoulder, across your chest,
and across your hips.
To fasten the belt, insert the latch
plate into the buckle, then tug on the
belt to make sure the buckl ...