Jeep Liberty: Special Care - Appearance Care And Protection From Corrosion - Maintenance Procedures - Maintaining Your Vehicle - Jeep Liberty Owner's ManualJeep Liberty: Special Care

• If you drive on salted or dusty roads or if you drive near the ocean, hose off the undercarriage at least once a month.

• It is important that the drain holes in the lower edges of the doors, rocker panels, and tailgate must be kept clear and open.

• If you detect any stone chips or scratches in the paint, touch them up immediately. The cost of such repairs is considered the responsibility of the owner.

• If your vehicle is damaged due to a collision or similar cause, which destroys the paint and protective coating, have your vehicle repaired as soon as possible. The cost of such repairs is considered the responsibility of the owner.

• If you carry special cargo such as chemicals, fertilizers, de-icer salt, etc., assure that such materials are well packaged and sealed.

• If a lot of driving is done on gravel roads, consider mud or stone shields behind each wheel.

• Use MOPAR Touch Up Paint or equivalent on scratches or chips as soon as possible. Your authorized dealer has touch up paint to match the color of your vehicle.

    Washing
    • Wash your vehicle regularly. Always wash your vehicle in the shade using MOPAR CarWash or equivalent, or a mild car wash soap, and rinse the panels completely with clear water. • If insec ...

    Wheel And Wheel Trim Care
    • All wheels and wheel trim, especially aluminum and chrome plated wheels, should be cleaned regularly with a mild soap and water to prevent corrosion. • To remove heavy soil and/or excessive ...

    See also:

    Electronic climate control, ECC
    Electronic climate control, ECC 1 Temperature control, driver's side 2 Heated driver's seat* 3 Defroster (maximum effect) 4 Blower 5 Manual air distribution—floor 6 Manual air distribution†...

    Removing a paired device
    1. In Bluetooth mode, press OK/MENU. 2. Turn TUNE to Remove Bluetooth device and press OK/MENU. 3. Select the device to be removed by turning TUNE and confirm by pressing OK/ MENU. > A que ...

    Dimensions
    Dimensions ...