Volvo XC60: Side marker lights
NOTE
Before starting to replace a bulb, see
page 322.
1. Remove the headlight housing from the vehicle (see page 322).
2. Remove the bulb holder by turning it counterclockwise and pulling it out of the headlight housing.
3. Pull out the burned out bulb and install a new one. It can only be inserted in one position.
4. Reinsert the bulb holder into the headlight housing and turn it clockwise.
5. Reinstall the headlight housing.
Turn signals
1. Remove the headlight housing from the
vehicle (see page 322).
2. Remove the bulb holder by turning it counterclockwise
and pulling it out of the headlight
housing.
3. Pull out the holder ...
Rear fog light
The rear fog light (located on the driver's side
of the vehicle) can be reached from behind the
bumper
1. Remove the bulb holder by turning it counterclockwise.
2. Remove the burned out bulb ...
See also:
Reverse Gear Wipes
If the rear wiper control is off, the rear wiper will automatically operate continuously
when the shift lever is in R (Reverse), and the front windshield wiper is performing
low or high speed wipe ...
Towing a disabled vehicle
Proper towing or lifting equipment is required to prevent
damage to your vehicle. Use of safety chains is recommended.
Attach towing device to main structural members
of the vehicle, not to bump ...
Type A
NOTE
The blower fan rotates at a low speed
when the engine coolant temperature is
low. For efficient defogging or dehumidifying
in cold weather, press the “A/C”
button.
The automatic cl ...
