Volvo XC60: Selecting a channel
There are three ways of tuning in a channel:
• Using the left and right arrow keys to go to the next channel. Skipped channels (see page 221) will be excluded.
• By turning the TUNE control and selecting a channel from the list.
• Through direct channel entry.
NOTE
• The numbers of skipped or locked
channels will not be displayed.
• If a channel is locked, the access code
must be entered before the channel can
be selected. See "Unlocking a channel"
on page 221.
Selecting a channel category
1. Turn TUNE to display a list of channels. 2. Press EXIT. 3. Turn TUNE to scroll through the list of categories and press OK/MENU to make a selection. > The channels in the selected categor ...Direct channel entry
The Sirius satellite channels are in numerical order throughout all of the categories. To access a channel directly: 1. Turn TUNE to access the channel list. 2. Use the number key buttons to ent ...See also:
Display Units In
The EVIC can be changed between English and Metric
units of measure. The units apply to the Outside Temperature,
Average Fuel Economy, Distance to Empty, and
Tire Pressure displays. To make your ...
Load anchoring eyelets
The load anchoring eyelets on both sides of the
vehicle are used to fasten straps, etc., to help
anchor items in the cargo area.
WARNING
• Cover sharp edges on long loads to help
prevent i ...
All-Wheel Drive (AWD) (if so equipped)
- For AWD equipped vehicles, do not
attempt to raise two wheels off the
ground and shift the transmission to
any drive or reverse position with
the engine running. Doing so may
result in ...