Jeep Liberty: Seat Belts
Inspect the belt system periodically, checking for cuts, frays, and loose parts. Damaged parts must be replaced immediately. Do not disassemble or modify the system.
Front seat belt assemblies must be replaced after a collision. Rear seat belt assemblies must be replaced after a collision if they have been damaged (i.e., bent retractor, torn webbing, etc.). If there is any question regarding belt or retractor condition, replace the belt.
Air Bag Warning Light
The light should come on and remain on for four to eight
seconds as a bulb check when the ignition switch is first
turned ON. If the light is not lit during starting, see your
authorized dealer. ...
See also:
Instrument Panel Illumination Control
This control is located on the instrument panel, to the left of the steering
column.
(Instrument Panel Brightness): Turn
clockwise or counterclockwise to brighten or dim the lights. ...
Headlamp levelling
Except for vehicles with discharge headlamps
The angle of the headlamp beam varies depending upon the load carried by the
vehicle. The headlamp levelling switch can be used to adjust the headlamp ...
Ice and snow
Always keep the air intake grille at the base of
the windshield free of snow. ...
