Subaru Forester: Scan (type A, B and C audio)
The scan mode lets you listen to the first 10 seconds of each track/file in succession.
Press the “SCAN” button to start scanning upward beginning with the track/ file(s) following the currently selected one.
After all track/file(s) in the disk/folder have been scanned, normal playback will be resumed. To cancel the scan mode, press the “SCAN” button again.
NOTE
The scan mode will be cancelled if you
perform any of the following steps.
- Press the “RPT” button
- Turn the “TUNE/TRACK/CH” dial
- Press the “” or “”
side of the “FOLDER/PTY/CAT” button
- Press the “” button
- Press the disc select button (type B audio)
- Select the mode other than CD mode
- Press the “LOAD” button when there is free space in the CD magazine (type B
audio)
- Turn off the power of the audio equipment
- Turn the ignition switch to the “LOCK” position
Random playback
To playback a track/file(s) at random, press the following button (random button) while the track/file is playing. *1: For type A, B and C audio, press the button for 0.5 second or longer. * ...Display selection (type A, B and C audio)
If you press the “TEXT” button during playback, the display will change as shown in the following sequence. For CD-DA: For MP3/WMA/AAC: For iPod®: ...See also:
Rear view monitor system camera
Vehicles without spare tire
In the following cases, it may become
difficult to see images on the screen
even if the system functions correctly.
●The vehicle is in a dark area, such
as a ...
How do states use OBD II for emission inspections?
Many states connect a computer directly to a
vehicle's OBD II system. The inspector can
then read "faults." In some states, this type of
inspection has replaced the tailpipe emission
...
Checking the transaxle oil (manual)
Transaxle lubricant in the manual transaxle
should be checked at those intervals specified
in the vehicle maintenance schedule in Section 5.
Recommended Oil
Use only HYUNDAI GENUINE PARTS MTF ...