Kia Sportage: Road warning
Hazard warning flasher The hazard warning flasher serves as a warning to other drivers to exercise extreme caution when approaching, overtaking, or passing your vehicle. It should be used whenever emergency repairs are being made or when the vehicle is stopped near the edge of a roadway. Depress the flasher switch with the ignition switch in any position. The flasher switch is located in the center console switch panel. All turn signal lights will flash simultaneously. • The hazard warning flasher operates whether your vehicle is running or not. • The turn signals do not work when the hazard flasher is on. • Care must be taken when using the hazard warning flasher while the vehicle is being towed.
In case of an emergency
Road warning In case of an emergency while driving Overheating Emergency starting Electrical circuit protection Towing If you have a flat tire ...In case of an emergency while driving
If the engine stalls at a crossroad or crossing If the engine stalls at a crossroad or crossing, set the shift lever in the N (Neutral) position and then push the vehicle to a safe place. If you h ...See also:
Tire chains
NISSAN recommends using the following
tire cables made by Peerless Chain
Company for this vehicle due to limited
tire clearance. Call 800-533-8056 to
order tire chains for your vehicle.
- ...
Gasoline for cleaner air
Your use of gasoline with detergent
additives will help prevent deposits from
forming in your engine and fuel system.
This helps keep your engine in tune and
your emission control system workin ...
Adjusting the settings
■ Adjusting the temperature setting
Turn the temperature control dial clockwise (warm) or counterclockwise
(cool).
If is not pressed, the system
will blow ambient temperature air or
heate ...