Range Rover Evoque: Road testing dynamometers (rolling roads)
It is essential that any dynamometer testing is
carried out only by a qualified person, familiar
with the dynamometer testing and safety
procedures practised by Dealers/
Authorised Repairers.
READ NEXT:
If the vehicle has been
driven
recently, do not touch exhaust and
cooling system components until the
engine has cooled.
Never leave the engine running in an
unventilated area - exhaust gases
Under no circumstances
should any
part of the fuel system be dismantled
or replaced by anyone other than a
suitably qualified vehicle technician.
Ensure sparks and naked lights are
kept away f
Service data recorders in your vehicle are
capable of collecting and storing diagnostic
information about your vehicle. This potentially
includes information about the performance or
status of var
SEE MORE:
Control Diagram
NOTE: A = Hardwired; F = RF transmission; N = Medium speed CAN (controller
area network) bus; O = LIN (local
interconnect network) bus.
Instrument cluster
CJB (central junction box)
Radio frequency (RF) receiver
RFA (remote function actuator) / KVM (keyless vehicle module)
Re
Transmission Cooling - Component Location
COMPONENT LOCATION - STANDARD CLIMATE
Transmission fluid cooler
COMPONENT LOCATION - HOT CLIMATE
Auxiliary transmission fluid cooler
Transmission fluid cooler
Transmission Cooling - Overview
OVERVIEW
The AW F21 automatic transmission uses an externa
© 2011-2024 Copyright www.rrevoque.org