Jeep Liberty: Reset
It may be necessary at some point in time to reactivate the Auto Up feature. To do so, perform the following procedure:
1. Pull the window switch up to close the window completely and continue to hold the switch up for an additional two seconds after the window is closed.
2. Push the window switch down firmly to the second detent to open the window completely and continue to hold the switch down for an additional two seconds after the window is fully open.
Auto Up Feature With Anti-Pinch Protection — If Equipped
On some models, the driver’s and front passenger’s (if
equipped for passenger side) power window switches
have an “Auto Up” feature. Pull the window switch fully
upward to the second det ...
Window Lockout Button
The window lockout button on the driver’s door trim
panel allows you to disable the window control on the
rear doors. To disable the window control on the other
doors, press and release the wi ...
See also:
Erasing warning messages
When a low tire pressure warning message has
been displayed, and the tire pressure warning
light has come on:
1. Use a tire pressure gauge to check the
inflation pressure of all four tires.
2. ...
Interior
Manual inside rearview mirrors can be adjusted by holding in the center to move
the mirror for a clearer view of behind the vehicle. Adjust the mirror to avoid
glare from the headlamps behind you. ...
Mitsubishi Outlander PHEV (2024) shares its platform with the Nissan Rogue
When considering purchasing or leasing a vehicle, Mitsubishi might not be the first brand that comes to mind. However, if you’re interested in a plug-in hybrid crossover, the 2024 Mitsubishi ...
