Subaru Forester: Reprogramming a single HomeLink® button
1. Press and hold the HomeLink® button you wish to reprogram. DO NOT release the button until step 4 has been completed.
2. When the HomeLink® indicator light begins to flash slowly (after approximately 20 seconds), position the hand-held transmitter of the device between 1 to 3 inches (25 to 76 mm) away from the HomeLink® button you wish to program.
3. Press and hold the hand-held transmitter button. The HomeLink® indicator light will flash, first slowly and then rapidly.
4. When the indicator light begins to flash rapidly, release both buttons.
The programming for the previous device is now erased and the new device can be operated by pressing the HomeLink® button.
Programming other devices
To program other devices such as door
locks, home lighting and security systems,
contact HomeLink® at www.homelink.com
or call 1-800-355-3515. ...
Erasing HomeLink® button memory
NOTE
- Performing this procedure erases
the memory of all the preprogrammed
buttons simultaneously. The memory
of individual buttons cannot be erased.
- It is recommended that upon the
sale ...
See also:
Brakes
If the brakes do not operate properly, have the
brakes checked by a NISSAN dealer. ...
Opening and closing the side windows
Front left
Front right
ear right
ear left
The switches for all side windows are located on the driver's door. There is
also a switch on each door for the corresponding side window. ...
If You Can Not Shift Automatic Transmission Gearshift Lever Out of “P” (PARK)
Vehicles with an automatic transmission have an electrically operated park-lock
feature. If the vehicle’s battery is discharged, or there is some other electrical
failure, the automatic transm ...
