Subaru Forester: Replacing bulbs
Bulbs may become very hot while illuminated. Before replacing bulbs, turn off the lights and wait until the bulbs cool down. Otherwise, there is a risk of sustaining a burn injury.
Replace any bulb only with a new bulb of the specified wattage. Using a bulb of different wattage could result in a fire. For the specified wattage of each bulb, refer to “Bulb chart”.
- Headlights (models with HID headlights)
- Headlights (models without HID headlights)
- Position light
- Front turn signal light
- Rear combination lights
- License plate light
- Dome light, map light, cargo area light and door step light
- Other bulbs
Installation of accessories
Always consult your SUBARU dealer
before installing fog lights or any other
electrical equipment in your vehicle. Such
accessories may cause the electronic
system to malfunction if they are in ...
Headlights (models with HID headlights)
High-intensity-discharge (HID) bulbs
are used for the low beams of the
headlights. These HID bulbs use an
extremely high voltage. To avoid the
risk of an electric shock that could
result ...
See also:
Important notes on the use of KEYLESSGO
The KEYLESS-GO key can be used like a conventional key.
You can combine KEYLESS-GO functions with those of a conventional key,
e.g. unlock with KEYLESS-GO and lock with the
button.
Always ...
Starting Procedures
Before starting your vehicle, adjust your seat, adjust both
inside and outside mirrors, and fasten your seat belts.
WARNING!
• When leaving the vehicle, always remove the key
fob from the ign ...
Using the system
The system is operated using the remote
control.
To release the remote from the docked
position, press at the top of the remote (1) to
unlatch it.
Do not attempt to pull the
remote
control ou ...
