Jeep Liberty: Replacement Keys
NOTE: Only keys that are programmed to the vehicle electronics can be used to start and operate the vehicle.
Once a Sentry Key is programmed to a vehicle, it cannot be programmed to any other vehicle.
CAUTION!
Always remove the Sentry Keys from the vehicle
and lock all doors when leaving the vehicle unattended.
At the time of purchase, the original owner is provided with a four-digit Personal Identification Number (PIN).
Keep the PIN in a secure location. This number is required for authorized dealer replacement of keys. Duplication of keys may be performed at an authorized dealer or by following the customer key programming procedure. This procedure consists of programming a blank key to the vehicle electronics. A blank key is one that has never been programmed.
NOTE: When having the Sentry Key Immobilizer System serviced, bring all vehicle keys with you to an authorized dealer.
Sentry Key
The Sentry Key Immobilizer System prevents unauthorized
vehicle operation by disabling the engine. The
system does not need to be armed or activated. Operation
is automatic, regardless of whethe ...
Customer Key Programming
If you have two valid Sentry Keys , you can program
new Sentry Keys to the system by performing the
following procedure:
1. Cut the additional Sentry Key Transponder blank(s)
to match the ignit ...
See also:
Automatic transmission
Shift the transmission to position P. The transmission position display in the
multifunction display shows P.
You can also start the engine when the transmission is in position N. ...
Shutting the Engine Off After a Remote Start
To shut off the engine:
○ Press until the parking lamps
turn off.
○ Turn on the hazard warning flashers.
○ Insert the key and turn it to ON/ RUN and then back to LOCK/OFF. ...
Information Display
Information Display
(1) Clock. (2) Thermometer. (3) Instantaneous fuel consumption/Average fuel
consumption/Driving range. (4) “H” button. (5) “M” button. (6) “DISP” button. (7)
Free ...
