Mercedes-Benz GLK-Class: Removing the towing eye - Installing/removing the towing eye - Towing and tow-starting - Breakdown assistance - Mercedes-Benz GLK-Class Owner's ManualMercedes-Benz GLK-Class: Removing the towing eye

  • Loosen the towing eye and unscrew it.
  • Attach cover 1 to the bumper and press until it engages.
  • Place the towing eye in the vehicle tool kit.
    Installing the towing eye
    Vehicles with a trailer tow hitch: if possible, secure the towing device on the trailer tow hitch (). X Remove the towing eye from the vehicle tool kit (). WARNING The exhaust tail pipe may ...

    Towing the vehicle with the rear axle raised
    Only possible on vehicles without 4MATIC. When towing your vehicle with the rear axle raised, it is important that you observe the safety instructions (). The ignition must be switched off if y ...

    See also:

    SRS warning light
    This warning light system monitors the airbag sensor assembly, front airbag sensors, side and curtain shield airbag sensors, curtain shield airbag sensors, driver's seat position sensor, driver's se ...

    Reporting safety defects in Canada
    If you believe your vehicle has a defect that could cause a crash or could cause injury or death, you should immediately inform Transport Canada in addition to notifying Volvo Cars of Canada C ...

    Second seat
    When a person is sitting in the second seat, raise the head restraints to height at which it lock in position. Refer to “Head restraints” on page 2-22. NOTE: ● It is possible to adjust ...