Honda CR-V: Removing a PC Card

To remove a PC card from the audio unit, fold back the screen by pressing the OPEN button. Press the eject button ( to remove the card. If you do not ) to remove the card. If you do not remove it from the slot, you cannot return the screen to the upright position.

To return the screen to the upright position, press the CLOSE button.

You can also eject a card when the ignition switch is off.

READ NEXT:

 PC Card Player Malfunction

If there is a problem with the PC card player, see your dealer. If you see an error message in the display while playing a PC card, find the solution in the chart to the right. If you cannot

 Playing an iPod (EX-L model with navigation system)

Playing an iPod (EX-L model with navigation system)

 To Play an iPod

This audio system can select and play the audio files on the iPod with the same controls used for the indash disc player. To play an iPod, connect it to the USB adapter cable in the upper gl

SEE MORE:

 Connecting Rod and Crankshaft End Play Inspection

1. Remove the oil pump. 2. Remove the baffle plates (see step 7). 3. Measure the connecting rod end play with a feeler gauge between the connecting rod and crankshaft. Connecting Rod End Play Standard (New): 0.15-0.35 mm (0.006-0.014 in.) Service Limit:. 0.40 mm (0.016 in.) 4. If the connecting r

 General Troubleshooting Information

DTC (Diagnostic Trouble Codes) The self-diagnostic function of the SRS system allows it to locate the causes of system problems and then store this information in memory. For easier troubleshooting, this data can be retrieved via a data link circuit. When you turn the ignition switch ON (II), the

© 2016-2024 Copyright www.hcrv.net