Jeep Liberty: Remote Start Abort Message On Electronic Vehicle Information Center (EVIC) —
If Equipped
The following messages will display in the EVIC if the
vehicle fails to remote start or exits remote start prematurely:
• Remote Start Aborted — Door Ajar
• Remote Start Aborted — Hood Ajar
• Remote Start Aborted — L/Gate Ajar
• Remote Start Aborted — System Fault
• Remote Start Aborted — Fuel Low
The EVIC message stays active until the ignition is turned to the ON/RUN position.
How To Use Remote Start
All of the following conditions must be met before the
engine will remote start:
• Shift lever in PARK.
• Doors closed.
• Hood closed.
• Liftgate closed.
• Hazard switch off.
â ...
To Enter Remote Start Mode
Press and release the REMOTE START button
on the RKE transmitter twice within five seconds.
The parking lights will flash and the horn
will chirp twice (if programmed). Then, the
engine will ...
See also:
Valet mode
When you choose the valet mode, the
alarm system does not operate. In valet
mode, the remote transmitter is used only
for locking and unlocking the doors and
rear gate and panic activation.
T ...
Deactivating/activating PARKTRONIC
To deactivate/activate PARKTRONIC
Indicator lamp
If indicator lamp 2 lights up, PARKTRONIC is deactivated.
PARKTRONIC is automatically activated when you turn the SmartKey to position
...
Adjusting the steering wheel electrically
1 To adjust the steering wheel height 2 To adjust the steering wheel position
(fore-and-aft adjustment)
Other topics:
EASY-ENTRY/EXIT feature ()
storing settings ()
...
