Volvo XC60: Remote key not functioning - Other alarm-related functions - Alarm - Locks and alarm - Volvo XC60 Owner's ManualVolvo XC60: Remote key not functioning

If the remote key is not functioning properly, the alarm can be turned off and the vehicle can be started as follows:

1. Open the driver's door with the key blade (see page 61 for information on detaching the key blade).

> This will trigger the alarm.

2. Insert the remote key into the ignition slot

2. Insert the remote key into the ignition slot (also on vehicles with the optional keyless drive). This will turn off the alarm.

3. Start the engine.

    Audible/visual alarm signal
    • An audible alarm signal is given by a battery powered siren. The alarm cycle lasts for 30 seconds. • The visual alarm signal is given by flashing all turn signals for approximately 5 minu ...

    Reduced alarm function
    Turning off the accessory alarm sensors In certain situations it may be desirable to turn off the accessory inclination and movement alarm sensors if, for example, you drive your vehicle onto a ...

    See also:

    Instrument panel light control (rheostat)
    The instrument panel lights can be made brighter or dimmer by turning the instrument panel light control knob. ...

    FCC and RSS-210 Industry Canada Compliance
    The Car2U system complies with Part 15 of the FCC rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, ...

    Conserving electrical current
    Keep the following in mind to help minimize battery drain: • When the engine is not running, avoid using ignition mode II. Many electrical systems (the audio system, the optional navigation ...