Subaru Forester: Rear wiper
To turn the rear wiper on, turn the knob on the end of the wiper control lever upward to the “INT” or “ON” position.
To turn the wiper off, return the knob on the end of the lever to the “OFF” position.
With the switch turned to the “INT” position, the rear wiper will operate intermittently at intervals corresponding to the vehicle speed (longer when the vehicle speed is low; shorter when the vehicle speed is high).
When the transmission is shifted into reverse, the rear wiper will switch to continuous operation. When the transmission is shifted to a position other than reverse, the rear wiper will return to intermittent operation.
Rear window wiper and washer switch
Rear window wiper and washer switch
Washer (accompanied by wiper
operation)
ON: Continuous
INT: Intermittent
OFF: Off
Washer ...
Washer
To wash the rear window while the rear
wiper is operating, turn the knob clockwise
to the “” position. The washer fluid
sprays until you release the knob.
To wash the rear window when the r ...
See also:
Menu settings
The default settings for four of the climate system's
functions can be changed in the menu
system.
• Blower speed in automatic mode.
• Recirculation timer for passenger compartment
air.
...
Trailer sway control (if equipped)
Your vehicle may be equipped with trailer sway control (TSC). When
properly equipped, trailer sway control will use the sensors of the
vehicle’s AdvanceTrac with RSC system to detect and attempt t ...
Different Size Tires and Wheels
If wheels or tires are installed that are a different size than the original
equipment wheels and tires, vehicle performance, including its braking, ride and
handling characteristics, stability, a ...
