Subaru Forester: Rear window wiper blade assembly - Replacement of wiper blades - Maintenance and service - Subaru Forester Owner's ManualSubaru Forester: Rear window wiper blade assembly

1. Raise the wiper arm off the rear window.

2. Turn the wiper blade assembly counterclockwise.

2. Turn the wiper blade assembly counterclockwise.

3. Pull the wiper blade assembly toward

3. Pull the wiper blade assembly toward you to remove it from the wiper arm.

4. Install the wiper blade assembly to the wiper arm. Make sure that it locks in place.

5. Hold the wiper arm by hand and slowly lower it in position.

    Windshield wiper blade rubber
    1) Support 1. Grasp the locked end of the blade rubber assembly and pull it firmly until the stoppers on the rubber are free of the support. 1) Metal spines 2. If the new blade rubber is ...

    Rear window wiper blade rubber
    1. Pull out the end of the blade rubber assembly to unlock it from the plastic support. 2. Pull the blade rubber assembly out of the plastic support. 1) Metal spines 3. If the new blade ...

    See also:

    Information displays
    Information displays in the instrument panel The information displays show information on some of the vehicle's functions, such as cruise control, the trip computer and messages. The informat ...

    About HD Radio
    NOTE - HD Radio Technology is a hybrid broadcasting system that employs digital and analog signals. - When the vehicle moves outside the digital broadcasting area (that is narrower than the ...

    Important safety notes
    WARNING Do not turn off the engine before the vehicle has come to a complete stop. With the engine not running, there is no power assistance for the brake and steering systems. In this case, ...