GMC Terrain: Pulling a Trailer - Driving Characteristics and Towing Tips - Towing - Driving and Operating - GMC Terrain Owner's ManualGMC Terrain: Pulling a Trailer

Here are some important points:

○ There are many laws, including speed limit restrictions that apply to trailering. Check for legal requirements with state or provincial police.

○ Do not tow a trailer at all during the first 1 600 km (1,000 miles) the new vehicle is driven. The engine, axle or other parts could be damaged.

○ During the first 800 km (500 miles) that a trailer is towed, do not drive over 80 km/h (50 mph) and do not make starts at full throttle. This reduces wear on the vehicle.

○ The vehicle can tow in D (Drive). Use a lower gear if the transmission shifts too often.

○ Do not use the Fuel Saver Mode when towing.

○ Obey speed limit restrictions. Do not drive faster than the maximum posted speed for trailers, or no more than 90 km/h (55 mph), to reduce wear on the vehicle.

○ For vehicles with the Ultra Rear Parking Assist (URPA) system, turn the system off when towing a trailer. If the tow bar is installed while not towing a trailer, change the URPA system to the “Tow Bar” setting. See Ultrasonic Parking Assist on page 9‑43 for more information.

    Driving Characteristics and Towing Tips
    WARNING The driver can lose control when pulling a trailer if the correct equipment is not used or the vehicle is not driven properly. For example, if the trailer is too heavy, the brakes may not ...

    Driving with a Trailer
    Towing a trailer requires experience. Get familiar with handling and braking with the added trailer weight. The vehicle is now longer and not as responsive as the vehicle is by itself. Check all ...

    See also:

    A FewWordsAbout Safety
    Your safety, and the safety of others, is very important. And operating this vehicle safely is an important responsibility. To help you make informed decisions about safety, we have provide ...

    Infant and/or toddler seats
    Use a safety seat that is recommended for the size and weight of the child. When installing a child safety seat: • Review and follow the information presented in the Airbag supplemental res ...

    Switching BLIS on and off
    BLIS is automatically activated when the ignition is switched on. The indicator lights will provide confirmation by flashing 3 times. • The system can be switched off by pressing the BLIS b ...