Jeep Liberty: Parksense Warning Display
The ParkSense Warning screen will only be displayed if Sound and Display is selected from the Customer- Programmable Features section of the Electronic Vehicle Information Center (EVIC). Refer to “Electronic Vehicle Information Center (EVIC)/Personal Settings (Customer- Programmable Features)” in “Understanding Your Instrument Panel” for further information.
The ParkSense Warning Display is located in the Instrument cluster’s EVIC display. It provides both visual and audible warnings to indicate the distance between the rear fascia/bumper and the detected obstacle.
ParkSense Warning Display
Parksense Sensors
The four ParkSense sensors, located in the rear fascia/ bumper, monitor the area behind the vehicle that is within the sensors’ field of view. The sensors can detect obstacles from approximate ...Parksense Display
When the vehicle is in REVERSE, the warning display will turn ON indicating the system status. Park Assist ON Park Assist Off The system will indicate a detected obstacle by showing three s ...See also:
Active Bending Lights (ABL)
Headlight pattern with the Active Bending Light function deactivated (left)
and activated (right)
When this function is activated, the headlight
beams adjust laterally to help light up a curve ...
Steering column
Never adjust the steering
column
while the vehicle is in motion.
1. Move the lever fully down to unlock the
column. Move the lever fully up to re-lock
the column.
2. Move the steering column u ...
Headlight Aiming
Since special procedures are required, we recommend you take your vehicle to
your SUZUKI dealer for headlight alignment. ...