Volvo XC60: Park position (P)
Select the P position when starting or parking.
Shiftlock
When P has been selected, the transmission is mechanically blocked in this position. The brake pedal must be depressed and the ignition must be in at least mode II (see page 82) before the gear lever can be moved from the P position.
Always apply the parking brake when the vehicle is parked. Press the control to apply the brake, see page 122.
CAUTION The vehicle must be stationary when position P is selected.
Automatic transmission
Shiftgate positions Depress the button on the front of the gear selector knob to move the gear selector between the R, N, D, and P positions. The gear selector can be moved freely between th ...Reverse ®)
The vehicle must be stationary when position R is selected. ...See also:
Voicetags
Voicetags enable the user to personalise the
Voice system so that a single name can be used
to call-up a navigation destination, telephone
number or radio channel.
To add a Voicetag:
1. Briefly p ...
Changing the remote control batteries
- Do not let dust, oil or water get on
or in the remote engine start
transmitter when replacing the
battery.
- Be careful not to damage the
printed circuit board in the remote
engine st ...
Jump Starting Instructions
WARNING:
• Never attempt to jump start your vehicle if the battery appears to be frozen.
Batteries in this condition may explode or rupture if jump starting is attempted.
• When making jum ...