GMC Terrain: Park Brake and P (Park) Mechanism Check - Vehicle Checks - Vehicle Care - GMC Terrain Owner's ManualGMC Terrain: Park Brake and P (Park) Mechanism Check

GMC Terrain / GMC Terrain Owner's Manual / Vehicle Care / Vehicle Checks / Park Brake and P (Park) Mechanism Check

WARNING

When you are doing this check, the vehicle could begin to move. You or others could be injured and property could be damaged. Make sure there is room in front of the vehicle in case it begins to roll. Be ready to apply the regular brake at once should the vehicle begin to move.

Park on a fairly steep hill, with the vehicle facing downhill. Keeping your foot on the regular brake, set the parking brake.

○ To check the parking brake's holding ability: With the engine running and the transmission in N (Neutral), slowly remove foot pressure from the regular brake pedal. Do this until the vehicle is held by the parking brake only.
○ To check the P (Park) mechanism's holding ability: With the engine running, shift to P (Park). Then release the parking brake followed by the regular brake.

Contact your dealer if service is required.

    Ignition Transmission Lock Check
    While parked, and with the parking brake set, try to turn the ignition to LOCK/OFF in each shift lever position. ○ The ignition should turn to LOCK/OFF only when the shift lever is in P (Park ...

    Wiper Blade Replacement
    Windshield wiper blades should be inspected for wear and cracking. See Maintenance Schedule on page 11‑3 for more information. Replacement blades come in different types and are removed in di ...

    See also:

    Theft-Deterrent Feature
    The theft-deterrent feature works by learning a portion of the Vehicle Identification Number (VIN) to the infotainment system. The infotainment system does not operate if it is stolen or moved to ...

    Gasoline Specifications (U.S. and Canada Only)
    At a minimum, gasoline should meet ASTM specification D 4814 in the United States or CAN/CGSB&-3.5 or 3.511 in Canada. Some gasolines contain an octane-enhancing additive called methylcyclopen ...

    Capacity and distribution
    Cargo capacity depends on the total weight of the occupants. (Cargo capacity) = (Total load capacity) - (Total weight of occupants) Steps for Determining Correct Load Limit⎯ (1)Locate the sta ...