Subaru Forester: P (Park) - Select lever - Automatic transmission - Starting and operating - Subaru Forester Owner's ManualSubaru Forester: P (Park)

This position is for parking the vehicle and starting the engine.

In this position, the transmission is mechanically locked to prevent the vehicle from rolling freely.

When you park the vehicle, first set the parking brake fully, then shift into the “P” position. Do not hold the vehicle with only the transmission.

To shift the select lever from the “P” to any other position, you should depress the brake pedal fully then move the select lever. This prevents the vehicle from lurching when it is started.

    Select lever
    : Shifting is possible with the brake pedal depressed. : Shifting is possible whether the brake pedal is depressed or not. However, while the ignition switch is in the “LOCK” ...

    R (Reverse)
    This position is for backing the vehicle. To shift from the “N” to “R” position, stop the vehicle completely then move the lever to the “R” position. When the ignition switch has bee ...

    See also:

    Sun visors
    1- To eliminate front glare 2- To eliminate side glare. Card holder Cards can be slipped into the front (A) of the vanity mirror lid. ...

    Passenger’s frontal airbag ON and OFF indicators
    Refer to “Front passenger’s frontal airbag ON and OFF indicators”. ...

    Rear loadspace
    Never allow passengers to travel in the loadspace under any circumstances. All vehicle occupants should be seated correctly and wear a seat belt at all times when the vehicle is in motion. Al ...