Nissan Rogue: Operations after activation
- When the rear view is displayed on the left side on the screen (B or C ), the view on the right side switches between the bird’seye view B and the front-side view C each time the CAMERA button is pushed (3 ).
- When the front view/bird’s-eye view D is displayed on the screen, pushing the CAMERA button (9 ) will switch the view on the right side to the front-side view E .
When the CAMERA button is pushed again (10 ), the screen which was displayed before the Around View Monitor was activated A is displayed.
- The view on the driver’s side switches to the rear view (B or C ) when the selector lever is shifted into the “R” (Reverse) position (5 or 7 ).
The view will switch back to the front view (D or E ) when the selector lever is shifted out of the “R” (Reverse) position (4 or 6 ).
Activating Around View Monitor
Selector lever operation: - When the selector lever is shifted into the “R” (Reverse) position (1 ) while a screen other than the Around View Monitor A is displayed, Around View Monitor is ...How to see each view
- The distance guide line and the vehicle width line should be used as a reference only when the vehicle is on a paved, level surface. The distance viewed on the monitor is for reference ...See also:
Interior mirror
The interior rearview mirror has two pivot points on the support arm
which lets you adjust the mirror up or down and from side to side.
WARNING: Do not adjust the mirror while the vehicle is in
mo ...
Wheels
Wash the wheels when washing the vehicle to
maintain their appearance.
- Clean the inner side of the wheels when the
wheel is changed or the underside of the
vehicle is washed.
- Inspect wheel ...
Tachometer
The tachometer shows the engine speed
in thousands of revolutions per minute.
Do not operate the engine with the
pointer of the tachometer in the red
zone. This may cause severe damage
to ...