Subaru Forester: Operating the driver’s window (type B)
Operating the driver’s window (type B)
1) Open
2) Automatically open
3) Close
To open:
Push the switch down lightly and hold it.
The window will open as long as the switch is held.
This switch also has a one-touch auto down feature that allows the window to be opened fully without holding the switch.
Push the switch down until it clicks and release it, and the window will fully open.
To stop the window halfway, pull the switch up lightly.
To close:
Pull the switch up lightly and hold it. The window will close as long as the switch is held.
Operating the driver’s window (type A)
Operating the driver’s window (type A) 1) Automatically open/close 2) Open/close To open: Press the switch down lightly and hold it. The window will open as long as the switch is held. Th ...Anti-entrapment function (type A)
- Never attempt to test this function using fingers, hands or other parts of your body. - The anti-entrapment function may not operate properly if some object gets trapped just before t ...See also:
To hook the top tether
1. Remove the headrest at the windowside
seating position where the child
restraint system has been installed with
the lower anchorages or seatbelt; lift up
the headrest while pressing the r ...
Pairing and connecting from the touch screen
1. Switch on your mobile phone’s Bluetooth®
connection. Make sure that your mobile
phone is in Bluetooth® discoverable mode,
sometimes referred to as find me mode
(see your phone’s operating ...
RKE Unlock
When Driver Door 1st Press is selected, only the driver’s
door will unlock on the first press of the Remote Keyless
Entry (RKE) transmitter UNLOCK button. When Driver
Door 1st Press is selecte ...