Volvo XC60: On and off
To switch Collision Warning on or off, press MY
CAR on the center console control panel and
go to Settings
Car settings
Driver
support systems
Collision Warning. If
Collision Warning is on, the system will perform
a self-test each time the engine is started by
briefly illuminating the warning light. See page
134 for more information about the menu system.
When the engine is switched on, the Collision Warning setting that was being used when it was switched off will be the default setting.
Operation
Settings are made by pressing MY CAR on the
center console control panel and using the
menus displayed. ...
Activating/deactivating warning signals
The collision warning system’s visual signals
are activated automatically when the engine is
started if the collision warning system is
switched on.
The audible warning signal can be activate ...
See also:
Supplemental Side Air Bag Inflatable Curtain (SABIC)
SABIC air bags may offer side-impact and vehicle rollover
protection to front and rear seat outboard occupants
in addition to that provided by the body structure. Each
air bag features inflated ...
While the downhill assist control system is operating
The slip indicator will flash to
indicate that the downhill assist
control system is operating, and
the stop lights and high mounted
stoplight will turn on.
■Conditions in which the downh ...
VSA and Tire Sizes
Driving with varying tire or wheel
sizes may cause the VSA to
malfunction. When replacing tires,
make sure they are the same size
and type as your original tires.
If you install winter tires, ...
