Toyota RAV4: Locking and unlocking the doors with the mechanical key
Using the mechanical key in order to perform the following operations:
1 Locks all doors
2 Unlocks all doors
Turning the key unlock the driver’s door. Turning the key once again unlocks the other doors.
If the electronic key does not operate properly (vehicles with smart key system)
If communication between the electronic key and the vehicle is interrupted or the electronic key cannot be used because the battery is depleted, the smart key system and wireless remote control ca ...Starting the engine
1 Shift the shift lever to P and apply the brakes. Touch the Toyota emblem side of the electronic key to the “ENGINE START STOP” switch. If any of the doors is opened and closed while the k ...See also:
Accessing navigation
From the Home menu touch the On road nav
soft key. Alternatively press the NAV hard key
on the facia. A caution screen will be displayed.
If the navigation screen language has not been
set, now is ...
Cruise control operations
1. ACCEL/RES switch
2. COAST/SET switch
3. CANCEL switch
4. MAIN (ON·OFF) switch
The cruise control allows driving at a speed
between 25 to 89 MPH (40 to 144 km/h)
without keeping your f ...
Distance To Empty (DTE)
Shows the estimated distance that can be traveled with
the fuel remaining in the tank. This estimated distance is
determined by a weighted average of the instantaneous
and average fuel economy, ...