Nissan Rogue: Lift gate - Pre-driving checks and adjustments - Nissan Rogue Owner's ManualNissan Rogue: Lift gate

- Always be sure the lift gate has

- Always be sure the lift gate has been closed securely to prevent it from opening while driving.

- Do not drive with the lift gate open.

This could allow dangerous exhaust gases to be drawn into the vehicle.

See “Exhaust gas (carbon monoxide)” in the “5. Starting and driving” section of this manual.

- Make sure that all passengers have their hands, etc. inside the vehicle before closing the lift gate.

Lift gate
Lift gate

To open the lift gate, unlock it and push the opener switch A . Pull up the lift gate to open.

The lift gate can be unlocked by:
- pushing the unlock button keyfob or the Intelligent Key (if so equipped) on the keyfob or the Intelligent Key (if so equipped) twice.

- pushing the lift gate request switch (if so equipped).

- pushing the power door lock switch to the unlock position.

- inserting the key into the driver’s door key cylinder and turning it to the rear of the vehicle twice.

To close the lift gate, pull down until it securely locks.

Hood
- Make sure the hood is completely closed and latched before driving. Failure to do so could cause the hood to fly open and result in an accident. - If you see steam or smoke coming from ...

Lift gate release
Lift gate release If the lift gate cannot be opened due to a discharged battery, follow these steps. 1. Remove the cover inside of the lift gate with a suitable tool. 2. Move the lever toward ...

See also:

Console box
Console box To open the console boxes, push up the knob A and pull up the lid. To close, push the lid down until latched. To remove the inner box (if so equipped) for cleaning or storing a la ...

Stain Repel Fabric Cleaning Procedure – If Equipped
Stain Repel seats may be cleaned in the following manner: • Remove as much of the stain as possible by blotting with a clean, dry towel. • Blot any remaining stain with a clean, damp towel. ...

Maintenance Safety
All service items not detailed in this section should be performed by a certified technician or other qualified mechanic. ...