Nissan Rogue: Key positions
LOCK (0)
Except for the Intelligent Key equipped model:
The key can only be removed from the ignition switch at this position.
For the Intelligent Key equipped model:
PUSH OFF -
The ignition switch is locked at this position.
PUSH ON -
The ignition switch will be unlocked while carrying the Intelligent Key.
OFF
The power supply is turned off.
ACC
The electrical accessory power activates without the engine turned on.
ON (3)
The ignition system and the electrical accessory power activate without the engine turned on.
START (4)
The engine starter activates and the engine will start. The ignition switch, when released, will automatically turn to the ON position.
As soon as the engine has started, release the ignition switch immediately.
Continuously Variable Transmission (CVT)
The ignition lock is designed so that the ignition
switch cannot be turned to the LOCK position
until the selector lever is moved to the P (Park)
position.
- When turning the ignition switch to ...
Before starting the engine
- Make sure the area around the vehicle is
clear.
- Check fluid levels such as engine oil, coolant,
brake fluid, and window washer fluid as
frequently as possible, or at least whenever
you re ...
See also:
Cruise control can be set when
●The shift lever is in D or 3 (4-speed models), or D or 4 (5-speed models).
●Vehicle speed is above approximately 25 mph (40 km/h).
■Accelerating after setting the vehicle speed
& ...
Attaching the towing eyelet
1 The towing eyelet is located under the floor
of the cargo area, with the spare tire and
may be partially concealed. This eyelet
must be screwed into the positions provided
on the right sides ...
Electronic vehicle information center (EVIC)
The Electronic Vehicle Information Center (EVIC) features
a driver-interactive display that is located in the
instrument cluster.
Electronic Vehicle Information Center (EVIC)
This system conv ...
