Nissan Rogue: Intelligent Key operating range - Intelligent Key system (if so equipped) - Pre-driving checks and adjustments - Nissan Rogue Owner's ManualNissan Rogue: Intelligent Key operating range

Intelligent Key operating range
Intelligent Key operating range

The Intelligent Key functions can only be used when the Intelligent Key is within the specified operating range from the request switch 1 .

When the Intelligent Key battery is discharged or strong radio waves are present near the operating location, the Intelligent Key system’s operating range becomes narrower, and the Intelligent Key may not function properly.

The operating range is within 31.50 in (80 cm) from each request switch 1 .

If the Intelligent Key is too close to the door glass, handle or rear bumper, the request switches may not function.

When the Intelligent Key is within the operating range, it is possible for anyone who does not carry the Intelligent Key to push the request switch to lock/unlock the doors including the lift gate.

    Intelligent Key system (if so equipped)
    - Radio waves could adversely affect electric medical equipment. Those who use a pacemaker should contact the electric medical equipment manufacturer for the possible influences before u ...

    Door locks/unlocks precaution
    - Do not push the door handle request switch with the Intelligent Key held in your hand as illustrated. The close distance to the door handle will cause the Intelligent Key system to have di ...

    See also:

    Central door locks
    Vehicles without the keyless entry system and vehicles without the keyless operation system Using the key on driver’s door locks or unlocks driver’s doors and the tailgate. 1- Lock. 2- Unloc ...

    Introduction
    The Park Assist Camera uses the display in the center console to show the area behind the car while you are backing up. PAC also shows guiding lines in the on-screen image to indicate the direc ...

    Starting your vehicle
    Starting your vehicle The remote control start system is activated by pressing the “” button twice within 3 seconds on your remote control transmitter. The system will check certain p ...