Nissan Rogue: Instrument brightness control
The instrument brightness control operates when the headlight switch is in the or position.
Turn the control A to adjust the brightness of the meter panel and the instrument panel lights.
The brightness indicator B will be shown briefly in the vehicle information display when the control is turned.
When the brightness level reaches the maximum or minimum, a beep will sound.
When the brightness level reaches the minimum, the meter panel and the instrument panel lights will be turned off.
After the ignition switch is turned to the OFF position, the brightness indicator B is displayed for 30 seconds.
Fuel gauge
The gauge A indicates the approximate fuel level in the tank. The gauge may move slightly during braking, turning, acceleration, or going up or down hills. Refill the fuel tank before the gaug ...Compass (if so equipped)
When the ignition switch is turned to the ON position, the compass display B will indicate the direction of the vehicle’s heading. If the display reads “C”, calibrate the compass by d ...See also:
Actual Mileage and EPA Fuel Economy Estimates Comparison.
Fuel economy is not a fixed number.
It varies based on driving conditions,
driving habits and vehicle condition.
Therefore, it is not possible for one
set of estimates to predict fuel
economy ...
Jump starting
Connecting the jumper cables
Follow these instructions to jump start your
vehicle's dead battery or to jump start another
vehicle's dead battery using your vehicle. If the
12-volt auxiliary b ...
Door Locks
WARNING
Unlocked doors can be dangerous.
○ Passengers, especially children, can easily open the doors and fall out of
a moving vehicle. The chance of being thrown out of the vehicle in a cra ...